Advantages;
1.Fusion Splice-on type fast connector is pre-polished ,can be fusion spliced direct to φ3.0mm、φ2.0mm、φ 0.9mm cable and 3x2mm drop cable etc.
2.For the Fusion Splice-on type fast connector, the fusion position is inside the body of fast connector itself , can be protected by the heat shrinkable tube at the same time. So it is connected abidingly ,not easy broken
3.It is fusion type by the special fusion splicing machine , no need matching fluid like the mechanical type fast connector ,so it is low insertion loss, nearly 100% qualified , prolong use life, reduce the Maintenance cost
4.The operator can check the splicing situation by the monitor of fusion splicing machine ,so that to confirm if the splicing is successful . to make it have more stability
5.For the Mechanical type fast connector, compared to the Fusion Splice-on type fast connector, its quality is not steady, it depends on many factors, for example; the matching fluid, the fiber cleaver quality, the operator ‘s skills , carefulness and experiences etc. so the mechanical type quality is not steady, will need more Maintenance cost in the future.
Features;
quick, convenient, superior and reliable low insertion loss and high return loss ,strong tension ,low cost
Comparison between Fusion splice type & Mechanical type

 Comparison

Fusion splice type fast connector

Mechanical typefast connector

Construction Theory

Fusion by fusion splice machine, 
protected by the heat shrinkable tube

Two fibers connect in the mechanical
 V slot, matching fluid protect

nsertion loss

0.15dB

0.3dB

-40℃-+80℃

Loss no change

IL<0.2dB  RL<10dB

Lifetime

for ever

About 5-6 years

Stability

When temperature ,tide ,sand wind,
 loss no change

When temperature ,tide ,sand wind, loss 
change ,need Maintenance cost

Qualification Rate

100%

About 90%

Capacity Expansion

OK

No easy 

Practical Application

quality good, by simple Training, one worker 
can install easily, use forever

its quality is not steady, 
need Maintenance cost

Specifications of Fusion splice type fast connector

Item

Single mode fiber

Fiber diameter 

0.9mm/2.0mm/3.0mm and 3x2mm drop cable

Insertion loss

≤0.2dB

Return loss

≥55dB

Repeatability

<0.1dB

Interchangeability

<0.2dB

Working temperature

-40℃-+80℃

Tensile Strength

60N(6KGS)

Connector type

SC/UPC

Special tools;
   
fusion splicing machine  

fiber cleaver

 

drop cable striper

   

fiber striper 

 

fast connector jig

 

drop cable jig