Fusion Splicer HH-88A is a multifunctional Fusion splicing machine and have our own intellectual property right, It have five functions together: 1) Fiber stripping, 2) Fiber cutting, 3) Fiber cleaning, 4) Fusion splicing, 5) Heat shrinkage but It have small volume and light weight, and splice fast .
It adopts advanced PAS Fiber adjustment technology . Adopt four motors drive, have fiber adjustment function, it is not only used for FTTX project, but also can be used for the trunk line, It is the first multifunctional Fusion splicing machine in China.
The holders are interchangeable ,use the different holders to splice different cables
The machine is quakeproof, waterproof and dustproof, Adopt high-capacity batteries, night operation light, can support lots of working environments. It has a pallet part, so it can be mounted on the chest, can work in all FTTH operating environments.
Products Structure Introduction；
Cooling Pallet Position
Replaceable Heating Unit
Fiber Strip Device
Power Supply Port and Battery Position
Interchangeable Fiber Holders :
Fiber holders adopt Interchangeable design. we can change different fiber holders for different fiber splicing:
1) Splice-on fast connector---3x2mm drop cable
2)Splice-on fast connector---(2.0mm or 3.0mm)
3)3x2mm drop cable---3x2mm drop cable
4)3x2mm drop cable - Pigtail fiber (2.0mm or 3.0mm)
5)0.25mm Fiber---0.25mm Fiber
6)0.9mm Fiber---0.9mm Fiber
1)Based on PAS fiber adjustment technology
The fusion quality of the Fusion splicing machine depend on the Accuracy of Fiber adjustment. the machine adopt international the most advanced PAS Fiber adjustment technology
2) Adopt CMOS Image sensor Imaging system.
Adopt CMOS Image sensor Imaging system，make the image collection more accurately and faster, so that saving the splicing time, and supply more accuracy
3) Adopt four high-accuracy motors drive
Adopt four high-accuracy motors drive, so it have the fiber adjustment function , but the common FTTH fusion splicing machine which with two motor drive don’t have this function, so it improve the splicing quality and the splicing success rates.
4）It have five functions together:
It have five functions together : 1) Fiber stripping, 2) Fiber cutting, 3) Fiber cleaning, 4) Fusion splicing, 5) Heat shrinkage , so that save lot of splicing time and reduce the whole splicing cost, more better and more convenient for FTTX projects .
5) Small volume and light weight, and splice more faster
Among the multifunctional Fusion splicing machines ,ours is the smallest volume ,the lightest weight ,the most fast splicing speed one. and the splicing quality meet the requirements of trunk line splicing parameter . and It has a pallet part, so it can be mounted on the chest, can work in all FTTX operating environments.
|Average Fusion Loss
||cladding diameter 80μm～150μm,coating diameter 100μm～1000μm
|Fiber Adjustment Mode
||Advanced 4 axles Fiber Adjustment Mode
||Standard 2N PAS Fiber(optional)
||Vertical 304times, horizontal 152times.
||4.3 inch 640*480?LCD.
||Standard 25s , adjustable
|Splice Loss Estimate
||Internal accurate measurement get the Splice loss result
||Standard Chinese and English, can add other languages, show full working information
||10～16mm(coating diameter<250μm),16mm(coating diameter?250～1000μm)
|Heat Shrinkable Tube
||60mm,40mm,20mm or according to requirement
||Internal High-brightness LED supply convenience for night work
||Interchangeable for fiber cleaver, fusion splicing machine and hot fiber strip device,
||Standard 4500 times, replaceable
||LCD show the remaining electricity accurately
||Typically splice 200 times, charging for 3 hour
(can use when charging)
||Cycle life up to 600～800 times, is replaceable by yourself
||Standard USB Port
|Car Power Supply
||12V direct charging port, convenient for urgent charging
||Internal :lithium battery 11.1V, External Power Adapter, Input: AC100～240V, \
output: DC 13.5V/4.5A
||Temperature: -10°C～50°C ;Humidity 95%RH(40°C,no condensing) ;
||2.2kg(no battery ), 2.5kg(include battery)