model

Size(mm)

Core capacity

Cable Port(max)

Max diameter Of cable(mm)

Splice Tray model

Core capacity Tray Weight (kg)
ODF-2011 383×138 ×50 8-48 2 φ22 B 12-24 1.3
 
Sequence Number Inspection Item Requirement Inspection
Results
Conclusion
1 Appearance and configuration Appearance Shape integnity,
No defect,No burr,No bubble,N crack,No impurity,No hole,color uniform,to close and open is easy
Meets the requirements Qualification
Electric Connecting Set Electnic connecting or shut off section in the box,ground lead-out section on the externl shell. Meets the requirements
Optical Fibers Storage Set Residual fiber length no less than 1.6m >1.6m
Residual fiber curvature Radius no less than 37.5mm >40.5mm
2 Function YD/T 925-1997 Meets the requirements Qualification
Sequence Number Inspection Item Requirement Inspection
Results
Conclusion
3 Axis Tensile Between calbe and case≥500N >500N Qualification
Between cable connector and case≥5N >5N
4 Crush ≥200N Meets the requirements Qualification
5 Torsion ±90°,3cycles,1min Meets the requirements Qualification
6 High Temperature Test (55±2)℃,2h,after test at room temperature condition for 2h,color uniform,no loss increase color uniform,no loss increase Qualification
7 Low Temperature Test (-25±3)℃,2h,after test at room temperature condition for 2h,color uniform,no loss increase color uniform,no loss increase Qualification
8 Damp Heat Test (30±2)℃ (85±3)%,2h,after test at room temperature condition for 2h,color uniform,no loss increase color uniform,no loss increase Qualification
Sequence Number Inspection Item Requirement Inspection
Results
Conclusion
9 Insulated Resistance Insulated resistance≥2×104 Between two metal sections 1×106 Qualification
Betwwen metal section and ground 1×106
Between two cable
1×106
10 Voltage Resisting Strength DC 15KV holding 1min,No breakage,no electric arc Between two metal sections No breakage No electric arc Qualification
Betwwen metal section and ground No breakage No electric arc
Between two cable
No breakage No electric arc